RIVES & REVES 49M PIPER DUTCH BARGE
Located in Paris
€330,000 VAT PAID*
Rives & Reves is a lovely example of the ever popular Piper 49M.
Launched in 2019 she remains in very good condition. She was launched at Migennes in mid 2019 and has primarily used as a pied de terre in Paris. This is backed up with the engine hours showing only 95 hours.
The 5kva generator has 3 hours showing! The owner has just paid the piper team to attend the boat in Paris and carry out a full boat service so she is now 100% ready for the next adventure.
Date of Build: 2019
Overall length: 49ft / 14.95m
Overall beam: 13’ 9” / 4.23m
Air draft: 2.95m
Dry Weight: 29 tonne
- Beta marine 105 keel cooled with just 95 hrs
- Blokland keel cooler
- 75 l Vetus marine Calorifier with 1 kw immersion
- Bow and stern thrusters
- 7 kw Kohler marine generator
- Kabola central heating boiler running radiators to each cabin
- Reflex stove to saloon with dedicated fuel tank 200l
- Mastervolt power electronics
- 1200 amp/hrs of 2v agm batteries
- Hydraulic steering
- 24v Maxwell anchor winch with 50kg Halls type anchor
- 6000 btu marine aircon to bedroom
- Full stern cover
- Flexiteek decking to stern
- Gangplank and Brackets
- Simrad 7” plotter with full central and western Europe charts
- Simrad VHF
- Bosch washer/ dryer and dishwasher
- Guest sleeping in wheelhouse
- Day loo
- Master cabin with 5ft wide double berth
- Luxury shower enclosure
Accommodation
The accommodation is designed to be a very comfortable liveaboard for 2 people. Occasional guests are accommodated either by way of a bed settee or the wheelhouse seating converts to a double bed
The master cabin has a dedicated luxurious head with a walk-in shower, toilet and washbasin over a vanity unit. Guests aboard then have the use of the dayloo situated close to the wheelhouse
The Galley is fully equipped with a 4 burner gas hob, oven, sink, single fridge and a fridge/freezer combination. An integrated microwave and hob extractor are also fitted
The saloon features plenty of storage and is furnished with loose furniture. It also features the piper wine cellar which is a large hatch in the saloon floor that gives direct access to the bilge area
The wheelhouse opens direct to the stern deck via large bifold doors and is a great area to entertain or simply relax with a glass of that local wine
Construction
Built from Lloyds grade A steel blasted and primed. she has a 12mm keel plate, 8mm chines and 5mm cabin. Very large integrated tankage. The hull is coated with Jotun 2 pack marine paint. a full set of alloy anodes and a mastervolt isolation transformer completes the hull protection.
Fitted out is a Birch plywood and then painted with a high quality finish she looks as bright on the inside as the outside
Full specification sheet available upon request
Contact us for the Full list of upgrades and spec list on Rives & Reves